Phasor K3-7.0kW Diesel Marine Generator – 7.0 kW (60 Hz) – 1800 RPM – Standard Series
$9,249.00
- Description
- Reviews (0)
Description
KW Rating: 7.0 KW at 60 HZ – 5.5 KW at 50HZ. Kubota Diesel Engine, Single Bearing Direct Coupled Generator with 1% Solid-State Voltage Regulation and Low 1,800 RPM Operating Speed. Also, counts with a Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure. 5-Year Limited Warranty.
Phasor – K3-7.0kW Kubota Diesel Engine – Marine Generator – 7.0 kW (60 Hz)


Standard Features
- Kubota Diesel Engine
- Single Bearing Direct Coupled Generator
- ± 1% Solid-State Voltage Regulation
- Low 1,800 RPM Operating Speed
- Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure
- Single Series Circuit Control System with No Printed Circuit Boards – Tinned Wiring
- Fresh Water Double Pass Heat Exchanger
- Water Cooled Exhaust Manifold with Removable Integral Cupro-Nickel Heat Exchanger Core
- Zinc Anode in Heat Exchanger
- Stainless Steel Exhaust Elbow Cast
- Gear Driven Raw Water Pump
- Four Point Isolation Mounts S/S
- Molded Blue Silicone Water Hoses with Stainless Steel AWAB Clamps
- Air Intake Cleaner / Silencer
- Spin-On Lube / Fuel Filters
- Secondary 5 Micron Fuel Filter
- Self Bleed Fuel System
- USCG Approved Fuel Lines
- Electric Fuel Transfer Pump
- Forged Brass Oil Drain Valve with Safety Lock
- Awl-Craft 2000 Urethane Finish
- 5 Year Limited Warranty
- Circuit Breaker – Single Phase
- Belt Guard
Specifications
| Kubota Model | D1005-E4BG |
| Number of Cylinders | 3 |
| Cubic Inch Displacement | 61 |
| Fuel Consumption ( Gal/Hr ) | Full Load 0.61 Half Load 0.32 |
| Electric End | Linz |
| 7.0 Kw | 60 Hz |
| 5.5 Kw | 50 Hz |
| Bore x Stroke | 2.99″ x 2.90″ |
| Dimensions (LxWxH) without enclosure | 31.5″ x 18″ x 22.5″ |
| Dimensions (LxWxH) with enclosure | 35″ x 22″ x 25.5″ |
| Weight (lbs.) | 567 |
| Output (volts) | 120/240 |
| Output (amps) | 58/29 |
| Output (watts) | 7,000 (7.0 KW) at 60 HZ / 5,500 (5.5 KW) at 50 HZ |
| Exhaust Dia. | 2.0″ |
| Raw Water Dia. | 3/4″ |
| Fuel Line Dia. | 5/16″ |
| Return Line Dia. | 3/16″ |
Recommended Oil:
- 5w-40 Full Synthetic Oil
Optional Equipment
- Start – Stop – 20ft Harness
- Custom Remote Engine / Generator Instrument Panels
- DC Gauge Panel – 20ft Harness
- Stainless Steel Drip Pan
- Three Phase Generator Output
- Custom Front PTO Pulleys
- 24 Volt Starting System
- 50 Cycle Output
- Dedicated Motor Starting Generator Windings
- Sound Insulation Blanket
- Sound Attenuated Enclosure
- Powder Coated Aluminum
- Remote Oil Filter Kits
- BALMAR High Output Alternator
- Custom Chrome Packages
- Spare Parts Kit
Included With The Spare Parts Kit:
| 101-0081 | 1 x Duffle Bag With Phasor Marine Logo 1 x Capacitor 1 x 10 Micron Element – Racor Fuel Filter Separator 1 x Oil Pressure Switch w/Plug 1 x Temp Switch 1 x 1/4 NPT 5/16 x 1 Zinc 1 x Impeller LP1-2 for Oberdorfer Pump 1 x Belt RWP 1 x Belt, LP1-3.5 2 x LP1 HE Cap rubber 2 x LP1 HE Neo Washer |





Reviews
There are no reviews yet.