-5%

Yanmar 6CH-HTE3 marine diesel engine 170hp ML-Rated

0 out of 5

Original price was: $18,088.00.Current price is: $17,233.60.

Category:

Description

Yanmar 6CH-HTE3 Marine Diesel Engine 170HP M/L Rated

The Yanmar 6CH-HTE3 marine diesel engine combines a 6.494-litre, six-cylinder platform with direct fuel injection, turbocharging and intercooling. Yanmar specifies 125 kW / 170 metric HP at 2,550 rpm under the M rating, with a separate L-rated output for a different operating profile. yanmar.com

Looking for a Yanmar 6CH-HTE3 170HP engine for sale? Contact MSS Motorsports UG for current availability, engine condition and an itemised quotation covering your required propulsion package.

For a fishing-boat, workboat or transport-vessel project, assess the engine against the vessel’s loading pattern, propeller demand and approved operating duty.

170HP M Rating for Workboat Propulsion

The 170HP specification is the M rating. Yanmar also publishes 140 kW / 190 metric HP at 2,600 rpm under the L rating.

M denotes medium duty and L denotes light duty. Each rating has defined operating limits, so confirm the requirements applicable to the supplied engine and intended use. yanmar.com

Provide your installer with the expected daily and annual running hours, typical cruising load and periods of high engine demand. This information helps establish the appropriate rating and propulsion arrangement.

For a higher-output model in the same family, compare the Yanmar 6CH-DTE3 210HP M-rated marine diesel engine. Check the gearbox and installation requirements separately.

Technical Specifications

SpecificationManufacturer-Published Reference
Engine modelYanmar 6CH-HTE3
M-rated output125 kW / 170 MHP at 2,550 rpm
L-rated output140 kW / 190 MHP at 2,600 rpm
Engine configurationSix-cylinder, in-line, four-stroke diesel
Displacement6.494 litres
Bore × stroke105 × 125 mm
Fuel systemDirect injection
AspirationTurbocharged and intercooled
Cooling systemFreshwater cooling with heat exchanger
Starting systemElectric, 24V
Marine gear arrangementHydraulic
Reference dry package weight795 kg with YX-50S marine gearbox
Reference package dimensions1,575 × 736 × 1,096 mm with YX-50S marine gearbox

MHP means metric horsepower. The reference weight and dimensions include the stated gearbox configuration. Confirm the exact engine version, transmission suffix, installed equipment and applicable drawing for the offered package. yanmar.com

Review the official Yanmar CHE Series specifications for manufacturer information and model comparisons.

Heat-Exchanger Cooling and Maintenance Access

The 6CH-HTE3 uses a freshwater-cooling arrangement with a heat exchanger and separate freshwater and seawater pumps. frenchmarine.com

When assessing an engine, request available records for the cooling system, turbocharger and intercooler. Running-test evidence should identify the test duration, load and observed operating conditions.

For a repower, check access around filters, pumps, belts and inspection points. Ask your installer to assess the proposed engine with its exhaust route, cooling-water connections and service clearances.

A package that fits the machinery space still needs suitable access for inspection and routine maintenance.

Hydraulic Gearbox and Shaft-Drive Matching

Yanmar documents YX-50S and YX-71 hydraulic wet multi-disc gearbox configurations for the 6CH-HTE3. Confirm the exact gearbox designation, reduction ratio and output coupling before ordering. yanmar.com

Your installation assessment should cover:

  • Engine-bed dimensions, mounting positions and shaft height.
  • Gearbox ratio, propeller dimensions and shaft arrangement.
  • Required shaft rotation and alignment.
  • Exhaust routing and seawater intake connections.
  • Fuel supply, electrical system and control requirements.
  • Complete package weight and handling arrangements.

If retaining an existing transmission, provide its identification plate and installation details so your installer can assess compatibility with the proposed engine.

Compare Condition, Equipment and Total Project Cost

When reviewing a Yanmar 6CH-HTE3 price, request written confirmation of:

  • Engine identification, stated condition and documented hours, where available.
  • Approved rating and supporting technical documentation.
  • Service history and the scope of any repairs or rebuilding.
  • Available cold-start, warm-running and load-test evidence.
  • Gearbox condition, reduction ratio and supplied coupling.
  • Starter, alternator, instruments, wiring, controls and accessories included.
  • Terms for any warranty offered, including provider, coverage and exclusions.
  • Packing arrangements, estimated dispatch timing and delivery costs.

For a reconditioned unit, request the work record showing what was inspected, repaired or replaced and which tests followed.

Compare transport, installation components and commissioning alongside the engine purchase price to establish the complete repower cost.

Frequently Asked Questions

Does 170HP apply to both M and L ratings?

No. Yanmar publishes 170 MHP at 2,550 rpm for the M rating and 190 MHP at 2,600 rpm for the L rating.

Does the 795 kg reference weight exclude the gearbox?

No. It represents the published package with a YX-50S marine gearbox. Confirm the weight of the actual equipment supplied.

Are a gearbox and manufacturer warranty included?

Inclusions and warranty depend on the offered unit and supply arrangement. Request an itemised quotation and written warranty terms.

Request Your Yanmar 6CH-HTE3 Quote

Contact MSS Motorsports UG for a Yanmar 6CH-HTE3 quotation with your vessel make and model, current engine, gearbox model and ratio, intended duty, expected annual hours and purchase timing. Include your billing and delivery addresses to request equipment pricing and transport costs.