The H-Line engines are sturdy, reliable engines and are suitable for many applications, such as cabin boats, small fishing boats and larger canal boats. These engines have low noise and vibration levels due to their robust construction. They are also highly fuel efficient. The H-line engines are four-cylinder 4-stroke engines with an indirect fuel injection system, a dual-circuit cooling system with integrated heat exchanger and a seawater injected exhaust bend. Available in two versions: VH4.65 and VH4.80.
A few advantages of these engines
Extremely favourable power to weight ratio
Very low noise and vibration levels due to counter balancing shafts
Very low fuel consumption
Minimum hose connections, owing to extensive use of moulded rubber cooling system components
High alternator output as standard, developed for marine applications for fast recharging of the batteries
Self bleeding fuel system
Suitable for
Cabin boats
Sailing boats
Small fishing boats
Options
The H-line engines can be supplied with gearbox or saildrive
Alternatively, the H-Line can be supplied with an adaptor kit to fit an existing Volvo Penta saildrive, type 110S, 120S or 120SB
Available as a powerpack complete with hydraulic pump, when hydraulic power is needed for auxiliary components on board
| Technical Specification | Value |
|---|---|
| Max. output at flywheel (ISO 3046-1) | 48 kW (65.3 hp) |
| Max. output at propeller shaft (ISO 3046-1) | 46.6 kW (63.4 hp) |
| Number of cylinders | 4 |
| Bore × Stroke (mm) | 91.1 × 100 |
| Alternator | 12 Volt – 115 Amp |
| Capacity | 2607 cm³ |
| Gearbox, standard | TM345(A) 2/2.47:1 |
| Dry weight (kg) | 240 |
| Suction height of fuel lift pump (m) | 1.5 |
| Max. toerental (rpm) | 3000 |
| Optional gearboxes | ZF25A 1.93/2.29/2.71:1; ZF25 1.97/2.8:1 |
| Warning lights & audible alarm for | Oil pressure, temperature (fresh & raw water), charging current |
| Control lights for | Pre-heating |
| Cooling system, standard | Indirect cooling (keel cooling optional) |
| Max. installation angle (backwards) | 15° |
| Max. lateral inclination angle (continuous) | 25° |
| Max. lateral inclination angle (5 minutes max.) | 30° |
| Calorifier connection kit | Optional |
| Certification | EU-RCD II |
